Joined: 12 Oct 2018
|Posted: Fri Oct 12, 2018 2:12 am Post subject: Dyeing Finishing Machine factory
|Double padder machine:
Usage of te machine:
DGRZ1400-2 series Double padder machine is used for impregnating soften agent and hydro-extractor process of the tubular fabrics, it can be substitute for centrifugal machine and wet expander. It is high efficient and easy to operate.
● Working width: 1400mm
● Machine speed: 3-45m/min（Inverter control the motor, speed is adjustable）
● Motor power: 11.45kw
● Applicable compressed air pressure: 0.4-0.6Mpa
● Machine dimension（L×W×H）:7100mm×2750mm×6000mm
● Machine weight: 4.5T
● Machine capacity:minimum 4.5 ton & Maximum 5.5 ton (Depending on Fabric GSM: 160, Fabric Width: 20”inch)
● Turn table
Turn table is driven by motor, it can turn clockwise or anticlockwise according to untwist needing.
According to the torsion direction of the fabrics, send signal automatically, control the detwister head and turntable direction, X type delivery belt wheel driven by motor, decrease tension of the fabrics.
● Humidify system
This system consists of pump, humidify head, pipe, liquid tank. The softener will mix with the fabrics in showering mode,The liquid tank equips steam heating pipe,so the liquid can keep consistant temperature
● Air ballooning device
This part includes hand operation air spray and automatic ballooning, the air spray is the main ballooing device. The automatic ballooning device is controlled by two pieces single reverse valve. It is the assistant device.
● Water squeezing device and liquid squeezing device
Each device consists of 2 sets(four pieces) rubber roller made of special material and 2 sets air cylinder ,each air cylinder is controlled by single reverse valve.
● Tension adjust device
Set with a regulation-resistance to adjust tension between liquid squeezing roller and delivery device.
● Fabrics exit device
This device is driven by inverter controlled motor ensure synchronous running.
● Heating device
The heating device consists of heating pipe, thermo-couple, filter, reverse valve, pneumatic driven stop valve and steam trap, it can keep liquid temperature constant automatically
Dyeing Finishing Machine factory